View Full Version : 3 faults
Bad-Duvall
7th Feb 2008, 13:20
Ok Guys i have a Disco II and i have the abs, Traction control, and Hill decent. Lights are all on and there is a TSB on this but i was wanting to know if any one has had these problems before and what was the fix
BigDan
7th Feb 2008, 15:25
Very common, including mine. Look through the other threads there's loads about this, including one a bit lower down from this thread now.
walshy
7th Feb 2008, 17:08
Very common, including mine. Look through the other threads there's loads about this, including one a bit lower down from this thread now.
Mine too. Traced fault to the front wheel hub and sensor. New ones are about £200 each!!!!
BigDan
7th Feb 2008, 17:20
Mine too. Traced fault to the front wheel hub and sensor. New ones are about £200 each!!!!
Oh crickey!! whats £200 the wheel hub?? or sensor?
heap of junk
7th Feb 2008, 17:22
Oh crickey!! whats £200 the wheel hub?? or sensor?
our one has had them done and it turned out that it was just the sensors and i think there only about 50ish per sensor plus fitting
fartfield
7th Feb 2008, 19:53
Had the same touble with mine, replaced both rear sensors because the paperwork that cme with Tarquin said the front ones had both been replaced in the previous eighteen months. When we checked the codes prior to clearing them it gave intermitten fault on nearside front,Cleared the codes and had nothing showing since. When I fitted the new sesors I tightend up all the conectors on the slabs ecu because they seemed to be sloppy. Might be worth a try.
Bad-Duvall
7th Feb 2008, 20:23
So something as simple as a wss can cause 3 lights to come on?
vBulletin® v3.8.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.