PDA

View Full Version : Indicator stuck on

tracey777
7th Feb 2008, 20:46
My driver side indicator is stuck on, and my hazards dont work. I can only get the indicator of by disconnecting the battery, any ideas what is wrong?
Thanks
Tracey
lynalldiscovery
9th Feb 2008, 21:45
Not sure what model you have but check the inertia switch under the bonnet.



Lynall
tracey777
10th Feb 2008, 09:03
Do you know where I can find the Inertia switch under the bonnet. It is a 1994 300 TDI Discovery.
Thanks
Tracey
HarryD
10th Feb 2008, 20:08
Perhaps the flasher unit is u/s.
lynalldiscovery
11th Feb 2008, 06:38
I am not sure, my TD5 is on the engine bulkhead nearside.
Done some more thinking it wont be this because if the inertia is triggered all the indicators come on not just one side.
i would check all bulbe are correct then relay as said above the indicator stalk.



Lynall
kurgan
6th Nov 2008, 23:35
My driver side indicator is stuck on, and my hazards dont work. I can only get the indicator of by disconnecting the battery, any ideas what is wrong?
Thanks
Tracey


my 1998 disco 1 has just done the same -help?
ahebron
7th Nov 2008, 08:41
Funny that.
My 300TDi does it if it recieves a severe jarring.
I have to shut the car down for about 30seconds then restart it, so far it always clears.