Radio removal Disco 3

[johnmaundrell]

I need to instal a Nokia hands free in a Disco 3 anyone know how the radio comes out?

[Cocky Lil Guy]

Take the silver trim off around the centre console, just pulls off just held on by clips, then undo the Torx 20 screws, you need to undo the top panel with the hazard switch on, the radio and the heater controls. By the way the vehicle won't start without the heater controls connected!! Hope you've got the correct leads as the radio's aren't like usual!

Anyhing else just ask.

[johnmaundrell]

Could you please advise what leads I will require & where is the best place to buy them. Is this going to be complicated?

[Cocky Lil Guy]

Erm...don't know where to buy to be honest, try 'Autoleads' on the internet, only ever fitted a parrot phone kits which we do at work. You just need a convertor lead as i suspect that the nokia phone kit is for the normal ISO connectors which the disco 3 doesn't have. I'll have a look for you.

[johnmaundrell]

The Nokia only has a radio mute wire that goes to the radio I believe. Not sure what I need to connect to the radio speakers? Many thanks for your help.

[Cocky Lil Guy]

By the ooks of it you'll need an Automute link system. Best bet would be to take it to an auto electrians and see what they say.

What is your location?

[johnmaundrell]

I'm in Kent

[Cocky Lil Guy]

A little far from me otherwise i would of fitted it for you and got one. Other then that as its a bit far, think you'll best go to somewhere like your local lucas shop or such and ask in there they should know where to go.