PDA

View Full Version : sailsbury rear axle


adafish
24th Jul 2008, 16:31
with diff, even better still if it has Discs on aswell....mine getting a bit shagged, plenty play in diff....W.H.Y......just a thought.are they just called "axles" in SAILSBURY?

Swingletree
24th Jul 2008, 16:41
Salisbury?

Matt_300tdi90
24th Jul 2008, 16:45
Haven't you ever heard of SAILSBURY PLAIN Swingletree, you can take your wind powered landy there ;)

adafish
24th Jul 2008, 17:05
if you 2 haven't got one for sale....please stop posting on here....you...you bugga's you:D...go boil the kettle or somefink and leave me be:D

PinkSeriesIII
24th Jul 2008, 17:36
i haven't got one for sale either:D but how much play is bad news?

adafish
24th Jul 2008, 17:52
clonk every time i pull away...its not the trailing arms,they have new bushes, although they aren't cranked (which i need) and the "A" frame was replaced about 12months ago

ROB 110 HICAP
24th Jul 2008, 17:57
clonk every time i pull away...its not the trailing arms,they have new bushes, although they aren't cranked (which i need) and the "A" frame was replaced about 12months ago

Might be transfer box gear?
Will an Axel Foley fit?

adafish
24th Jul 2008, 18:05
AXEL bloody FOLEY.....ya muppet....i give ya " 48 HOURS " to come up with a decent reply;)

ROB 110 HICAP
24th Jul 2008, 18:09
AXEL bloody FOLEY.....ya muppet....i give ya " 48 HOURS " to come up with a decent reply;)

not another 48hours?:rolleyes:

PinkSeriesIII
24th Jul 2008, 18:11
clonk every time i pull away...its not the trailing arms,they have new bushes, although they aren't cranked (which i need) and the "A" frame was replaced about 12months ago

i got that, can lift a wheel and rotate it quite far before the diff starts to turn. Been like that since I had it though.

Porny
25th Jul 2008, 21:38
I've got one.... is a drum braked jobbie though.... but would be cheap.

Is on the 110 sat outside my workshop, no idea on play in diff etc etc. But feel free to pop down and have a look.

Ideally could do with yours in exhange though, just to keep the 110 rolling/moveable.



Ian

CCKW353A1
27th Jul 2008, 09:16
Wear in the half shafts & flanges????????????? easier repair than changing the axle.