Help please, does yours look like this

[diggerdog36]

Ive just replaced the bushes in my panhard rod and front anti-roll bar, but when I took the car out for a spin, the steering is out and the car 'skips' around the road if I hit a bump. Then I pulled over the let another car pass on a narrow road, when I pulled down off the embankment there was a horrible grinding/pulsing noise. When I got home I looked to see if there was anything obvious, and I cant remember the ACE actuator sitting at this angle, could someone please look and let me know!!!
Can the panhard rod be put in back to front/ or upside down.

[Swingletree]

Ive just replaced the bushes in my panhard rod and front anti-roll bar, but when I took the car out for a spin, the steering is out and the car 'skips' around the road if I hit a bump. Then I pulled over the let another car pass on a narrow road, when I pulled down off the embankment there was a horrible grinding/pulsing noise. When I got home I looked to see if there was anything obvious, and I cant remember the ACE actuator sitting at this angle, could someone please look and let me know!!!
Can the panhard rod be put in back to front/ or upside down.

Not 100% on your new fangled disco type stuff (all these fancy electrickery type things eh?:rolleyes:)

But all the defender panhard rods have a bend in them to allow the suspension to work and prevent the rod from catching on the diff. If youve put it in the wrong way round, ( if thats possible) it would bang off the top of the diff on bumps.