PDA

View Full Version : Tyre Pressure


gsgtsg
31st Jul 2008, 20:56
Hi,

I have just had a set of four new tyres on my Discovery 2 year 2000. These are the General Grabber AT2 (255/55 R18) tyres.

Please advise what the tyre pressure should be for the front and back when used on road/moterway?

Thanks.

diggerdog36
31st Jul 2008, 21:04
According to the handbook they are front 28psi and rear 38psi,
If your vehicle is fully loaded its front 28psi and rear 46psi.

I checked mine and they were way too high, so I let them down to the correct pressures and the tyres looked flat!!!