Best way to flush hose to rear washer?

[chris_debian]

Hi, all.

As you may have seen from my previous thread, I have had problems with my rear washer on my Disco 1.

Now that the jet is replaced, I realise that the hose is just full of crud. The front jets are fine. Has anyone got a good way of flushing the hose to the rear jet? Someone at work suggested Alka Seltzer in the reservoir!

Any help appreciated.

Cheers,

Chris.

[SCOTT MCLAREN]

An airline ? Or if you know a friendly ac/refrigeration engineer ( like me ! - your too far away :confused: ) a blast of nitrogen ! Its what I,d use coz you can screw the regulator from 0 to 600+PSI !

[LEE7]

Hi
I must be dangerous, My fridge firm will only let Me have a 10 bar regulator lol.


Regards.

Peter

[SCOTT MCLAREN]

I,m installing Daikin Altherma systems just now and part of the spec is a 3 hr 600psi pressure test - systems on r410a !

[LEE7]

With those pressures, you'll be doing CO2 systems next lol.

Apologies for stealing Chris's thread.



Regards.


Peter

[thomo]

try a jet wash down the line,

[freelanderPX54]

Wouldn't it be easier to replace with new tubing? Irrigation tubing from B&Q would do the job