6 inches...

[def110300tdi]

of brass wire, the approximate thickness of a coat hanger wire! Has anyone got some lying around? Been to my local model shop, but he doesn't stock it!

Thanks

[MUDRAT]

i have but not until a weeks time when i am back at school

[Satancom]

I can enquire in work in the morning.. Do you know what gauge it has to be? We have loads of mild/stanless 16g stuff knocking about!

[def110300tdi]

I can enquire in work in the morning.. Do you know what gauge it has to be? We have loads of mild/stanless 16g stuff knocking about!

Hi
Not sure on the gauge, but the same thickness as a wire coat hanger is the maximum thickness. Thank you for the offer of mild/stainless but I need brass. Does you firm have that aswell?

Cheers

[Satancom]

We only use the mild and stainless stuff, but whe just buy it in from our supplier.. If they do brass stuff I will pass their details on..Probably have to buy a bit more than 6 inches though. I will let you know though :)

[def110300tdi]

We only use the mild and stainless stuff, but whe just buy it in from our supplier.. If they do brass stuff I will pass their details on..Probably have to buy a bit more than 6 inches though. I will let you know though :)

Thank you.

[dannym2710]

what is it for exactly? we have plenty of tig wire at work

[def110300tdi]

I shoot black powder pistols. I do not fire it with a full charge, only half charge. To pack out the chamber, I use an inert powder, to measure the powder I have a .45 brass cartridge. I need to make a small handle for the brass cartridge, so I don't get the powder over fingers. I was hoping to bend the brass wire round the cartridge to make the handle.

[dannym2710]

doesnt have to be brass as such then.id say stainless would be as good as any, i have plenty of it lying around.ill get an old 45 cartridge and mock one up if you want to send me a drawing of what u want

[Satancom]

Thank you.

Sorry can't help here.. just stainless and mild from our suppliers!

[def110300tdi]

doesnt have to be brass as such then.id say stainless would be as good as any, i have plenty of it lying around.ill get an old 45 cartridge and mock one up if you want to send me a drawing of what u want

Hi
Great stuff, I am shooting tonight, I am robbing the idea from a a bloke at the club. I will take a photo tonight and post it on here.
Thanks again

[def110300tdi]

doesnt have to be brass as such then.id say stainless would be as good as any, i have plenty of it lying around.ill get an old 45 cartridge and mock one up if you want to send me a drawing of what u want

Hi, this it the type of thing I am looking for. The handle is made into hooks both sides so it hooks on to the container. Do you think you can help?

[CCKW353A1]

If you want brass looking, how about 2.5 or 3mm brazing rod.

[def110300tdi]

If you want brass looking, how about 2.5 or 3mm brazing rod.

The 2.5mm sounds good! Great idea, thanks.

[def110300tdi]

doesnt have to be brass as such then.id say stainless would be as good as any, i have plenty of it lying around.ill get an old 45 cartridge and mock one up if you want to send me a drawing of what u want

Hi Mate
Did you see the pics? Did they help or did you want a drawing?
Cheers

[dannym2710]

hi, just seen them now, will have a rifle round work on monday and see what weve got.should have some brazing or welding rod