Series 1 109 Truck Cab

[tycroes48]

Does anyone have for sale a bonnet for a 88/109 inch Truck Cab.Must be in A1 condition. Prefer N.West/ N.Wales area.

[tycroes48]

BTT

[landy-lover]

i have a truck cab for a 88"series 1 in very good condition with rear sliding windows in deep bronze green asking £175

[tycroes48]

Landylover its a 88/109 BONNET that I`m after, cheers

[Spotter]

Landylover its a 88/109 BONNET that I`m after, cheers

I've got a series 1 bonnet. Don't know what wheelbase it's off. What length would it be for an 88 or 109?

Andy
www.landroverheaven.com

[tycroes48]

Spotter I will get back to you with thew measurements as soon as possible, cheers.

[swag298]

If it's an 80" then there'll be a hole near the front left of the frame for the bonnet prop rod to go in.
If it's 86" the bonnet prop pivot will be on the left hand side (From the drivers seat)
An 88" pivot is on the right hand side.
Also an 88" bonnet is 1" longer than an 80" or 86" one. Can't remember the length though.

swag

[tycroes48]

Spotter, if you take a measurement down the centre line from windscreen to radiator it should 37 1/4 inches.

[Spotter]

It's only 36 1/4 so it must be from an 86" or 107".

Anyone need one?

Andy
www.landroverheaven.com

[tycroes48]

Come on people, someone must be breaking a 88/109 series 1. I`m desperate for a bonnet, can you help, cheers.