View Full Version : Random Wire from 13 pin abs connector
Paul Johns
6th Apr 2009, 18:06
Hi all my first post, Td5 2003 ES
Hope u can help I have a random wire going from i think pin 8 on the 13 pin abs black connector ,it follows the bonnet release cable inside, along top of the glove compartment behind dash and ends up not connected in the fuse box under the steering wheel with a female connector on it been trying to work out for ages what it is, does anyone know, extra earth??? I dont Know:confused:
Paul Johns
Paul Johns
7th Apr 2009, 15:47
Bueller Bueller, anyone anyone?? Ha
Paul Johns
8th Apr 2009, 16:53
Hi again, traced wire back to pin 9 on the black wabco abs, the original wire is the aswell but this extra one is crimped and soldered on to it then follows the path in my first post, I know pin 9 is for the shuttle valve switch i get the 3 amigos every now and again, so do you think someone has tried to cure it with this wire but the wire is not connected what the hell? ,ideas?:eek:
Paul Johns
9th Apr 2009, 17:58
Right every one, checked all the pins and continuity between earths from abs modulater, that wire i keep going on about i was just looking at the end of it and i thought well i put it on an earth, bing bing bing three amigos show:eek: turned key on and off lights gone round, the block still gone, touched wire on earth again remember this wire is under the steering wheel bing bing bing:confused:, key on and off all lights gone round the block hdc working still all gone, so its defo connected to the 3 amigos i wonder if the wire alows you to reset all the time??? really odd asked my inde LR he is not sure.
Thanks for viewing again:)
Paul
Paul Johns
14th Apr 2009, 12:29
Hi all,
My disco 2s under select warrenty for another three months so phoned stealertold him not happy with this wiring thing from modulator considering its earthing out, and blah blah not happy, they are going to pick it up next week and have a look, and leave me car to drive:) just worried that they wont cover it as select warrenty does not cover wiring, but im saying bought like it should have been checked.
I suppose it is rather a bad show it was from main stealer, and its starting throw the lights every day now will keep you informed:confused:
Paul Johns
24th Apr 2009, 18:10
Hi all L/R are going to change shuttlevalve under warrenty :cool:and deal with the odd wire, but they said that rear hub leaking and not covered under a select warrenty, new rear pads and new hub fitted at main stealer wait for it £650:eek::eek: ha ha no thanks my indey lr will do it i said. Does everyone agree thats nuts for that job. What do u all think.
Paul Johns
29th Apr 2009, 16:11
;)Hi all update on abs tc hdc, Lr replaced half of the modulater with part number SWO500040 under warrenty:D which includes the ecu unit for the modulater and shuttle valve. im sure this is the correct part to cure the 11,4 shuttle valve codes(three amigos), so i will keep you updated.
paul
vBulletin® v3.8.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.