PDA

View Full Version : Diff Lock Linkage

listerdiesel
4th May 2009, 07:00
Anyone breaking a Disco 1?

Looking for the difflock linkage to refit to a Disco 2.

Thanks,

Peter
Swingletree
4th May 2009, 07:41
Is that the lever with the splined inner bit at the top or the one thats a U channel?

I think its the U channel and I think I've got one you can have for free but I'll have to check tomorrow.

PM me and remind me, (got a memory like a sieve) ;)
listerdiesel
4th May 2009, 09:38
Is that the lever with the splined inner bit at the top or the one thats a U channel?

I think its the U channel and I think I've got one you can have for free but I'll have to check tomorrow.

PM me and remind me, (got a memory like a sieve) ;)

Can't tell you what it looks like, as we haven't got it at present!

All we have is the shaft coming out of the transfer box, that's all, so we need all the bits really.

Peter
Swingletree
4th May 2009, 10:03
Ah, ok, well I've got some bits in my drawer at work from a disco TBox thats on my Def so I'll dig em out tomorrow for you. ;)
listerdiesel
4th May 2009, 13:06
Great stuff, many thanks.

Peter
StrangeRover
4th May 2009, 13:43
This.
But ignore the yoke on Hi-Lo rod: It doesn't belong there.;)
Swingletree
4th May 2009, 13:46
Ah, do you need the selector unit as well (as in the pic above) or just the rods?
listerdiesel
4th May 2009, 15:11
My 1999 Disco 2 has all the guts inside the box, but no means of operating it, as the vehicle uses Traction Control to stop wheelspin (so they say)

To lock the centre diff therefore needs all required linkages, but we do have the Hi-Lo range and lever.

Peter
Swingletree
4th May 2009, 15:12
:D Tell you what, I'll grab what I've got tomorrow, post piccies of it and you tell me if you want it. :D
listerdiesel
4th May 2009, 21:04
Super!

Look forward to seeing the pic's.

Many thanks for your efforts, much appreciated!

Peter
DiscoBHZ
5th May 2009, 10:10
Super!

Look forward to seeing the pic's.

Many thanks for your efforts, much appreciated!

Peter
Hi Peter.

Will you let me know how you get on. I've got a '01 and was thinking of doing the same.

Thanks
listerdiesel
5th May 2009, 11:35
Hi Peter.

Will you let me know how you get on. I've got a '01 and was thinking of doing the same.

Thanks

Sure, be happy to, have you confirmed that you have the innards in the transfer box?

Peter
Swingletree
5th May 2009, 22:34
These are the two links that I've got, if they're any good to you PM me your address and I'll post them off.