PDA

View Full Version : Help Identifying fuse



jay_oldstuff
7th Aug 2009, 20:31
Hi chaps i wonder if you can help me with this one. my discovery cut out the other day upon popping the bonnet the cause was obvious the connection had come off the back of the injection pump (it was a loose fit and had vibrated off) anyway i stuck my hand it to push it back on and caught it on some metalwork result a big spark (id left the ignition on) and now no click from the solenoid when re connected. i got it going by bridging the connection to the battery with a bit of wire. anyone know where the fuse I've blown is located i cant seem to find it. and it's getting annoying having to pop the bonnet every time i want to start or stop the engine.

Jay

discool
7th Aug 2009, 22:02
I believe it's in the engine bay fuse box.

listerdiesel
8th Aug 2009, 08:37
The fuel solenoid cut-off valve is fed through the 'Spider' if you have an immobiliser fitted.

Fuse F3 in Satellite Box 1 feeds that circuit.

Peter

jay_oldstuff
9th Aug 2009, 19:02
Many thanks that was the one.
engine now starts and stops on the key again.

Jay