Still having probs with heater blower

[lego]

:confused: My rave disc is for 95 onwards discos so sadly no use. and the Haynes info if not brilliant.

I`ve just spent a lovely freezing two hours verfiying wire colours with a haynes manual, 13.29 in the good book :)

Anyway I tried the switch, and cleaned and check then replaced, no change.

Check the fuses A8 and B3 they are good, so started chasing the wires from the back of the fuses so I could find the correct relay (the last relay was for the indicators) anyway haynes says that coming out of A8 and B3 are a WLG (white light green wire) and G (green wire) both apparently go to the same relay..

So i traced the route of fuse A8 WLG (white light green wire) which runs away towards the passenger side and doesn`t go to a relay :eek:

Then to settle my panic I traced the route of B3 G (green wire) which went to the drivers side panel to a bunch of cable that were blanked off :rolleyes:

What on fullers earth is going on, and yes I have the correct cables..

Can someone pretty please help me.

[lego]

I posted this on several forums, it seems not all heater blowers have a relay?

is this true....I`am just trying to cover the easy stuff before I take the dash out you see.

[lego]

anyone got a schematic of the heater blower unit?