Gas Gas Ohlins
5th Jun 2006, 19:54
Remove plastic fan cowling by removing the top metal clips and then by wiggling the housing up out of the engine bay.NB There is a coolant pipe routed along the bottom of the cowling secured by 2 metal clips...just prise the coolant pipe off of these.....
37900
Slacken off the power steering pump pulley bolts and remove the pulley to enable the serpentine belt to be removed
37901
Slack belt with tensioner just hanging low,take off belt
37904
Take off 4 bolts holding power steering pump bracket(and therefore pump)mine only had 3 bolts in it...
37903
Lower the pump and bracket out of the way but do not disconnect the fluid pipes.
Remove alternator (one top nut and long bolt and a bottom short bolt)and zip tie it also out of the way.
37905
37900
Slacken off the power steering pump pulley bolts and remove the pulley to enable the serpentine belt to be removed
37901
Slack belt with tensioner just hanging low,take off belt
37904
Take off 4 bolts holding power steering pump bracket(and therefore pump)mine only had 3 bolts in it...
37903
Lower the pump and bracket out of the way but do not disconnect the fluid pipes.
Remove alternator (one top nut and long bolt and a bottom short bolt)and zip tie it also out of the way.
37905