PDA

View Full Version : decat for freelander xedi/ shuddering hippo



freebe
9th Jan 2007, 17:08
i was looking on ebay and i was thinking about buying a decat for my hippo it says in the advert that it will give me 8bhp more and i will have no problems when it comes to mot.s has anyone tried one and will i have any problems with the engin management sistem.i have also got a problem with my hippo it will not drive straight it keeps going to the left their is a noise on the left hand side now and agen but i have checked bearings ball joints and their is no play at all on the wheel and the car dose have a bit of a shudder at 1700 rpm could this be the left hand side engin mounting or the tie rod any help wud be most welcom

fergie2035
9th Jan 2007, 23:36
What's a decat?

freebe
10th Jan 2007, 00:28
a decat is a that part replaces the cat converter

Blippie
10th Jan 2007, 11:01
i it will not drive straight

First things to check are the tyre pressures and wear, and the tracking.

Cheers

Blippie

Taipan
10th Jan 2007, 13:16
Decat pipe does work well apparently. Check out the rover mg forums. They are alwasy praised on there.

Your vibration thing sounds exactly the same as mine. I also have noticed that my car is pulling to the left as well! I too have no play in the bearings but I do have a track rod end that is worn. I'lbe replacing this on Sunday, weather permitting, and will let you know if it cures teh problem. Howver, the curent suspect is engine mounts///