View Full Version : poor brakes ?
bilge rat
25th May 2007, 22:25
brakes seem poor, have checked for seized calipers all seem o.k. fitted new pads to the front, servo seems to have vacume there , but pedal feels as though there isnt enough asistance there. anything else i could try. cheers alan.,....
lynalldiscovery
26th May 2007, 07:26
Check vac pipe t-piece by fuel filter as they split.
Lynall
Les Henson
26th May 2007, 07:54
With the engine off, press the brake pedal and hold it. Start the engine and the pedal should drop about an inch or so. If this happens it means the servo is working. Could just be that your fluid needs changing - old brake fluid absorbs water and bits of rubber dust from the seals. If the fluid is very old it can have a drastic effect on braking performance.
vBulletin® v3.8.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.